The Logic Manege Grader range is ideal for quick and efficient levelling of artificial surfaces for indoor and outdoor Arenas and Riding Schools.

This system has several advantages over more basic tools like Chain Harrows or a Scrubber.
It is light weight and very easy to use, highly manoeuvrable, incorporates a plough to bring in material from the side boards and is capable of producing a level finish in ‘one pass’ - saving valuable time.
The Grader in basic form will level a variety of surface types with very little effort.
Wheels are incorporated for easy transportation to and from the working area and allow reversing into corners to pull out any build up of material.
When fitted with the Wheel Track Levelling Kit, it enables the grading of a rough surface in ‘one pass’. Blade design incorporates an opening end section, which angles back to ‘plough’ material in from the perimeter boards and features a rubber buffer to prevent any damage from side boards.
The Logic Manege Grader is ideal for use behind an ATV but can be used with any suitable vehicle. As with all Logic products it is of sturdy construction, features quality components and is a utility that will complement any equestrian establishment.

STANDARD FEATURES

• 2.5 metre width
• Perimeter plough - 1.1 metre wide, usually used first time round, then closed for normal grading, incorporates a rubber buffer to prevent damage.
• Raise and lower lever - easy to operate
• Depth adjustment - allows correct blade setting for various types of surface and for altering the hitch height to suit different towing vehicles.
• Low ground pressure tyres - 20 x 7 x 8. - ensuring all round capability on hard and soft surfaces
• Swivel hitch with 50mm ball coupling
• Strong construction
• Quality paint finish

 


SG250 Surface Grader


SG250 Depth Adjustment


SG250 Rubber Buffer & Perimeter Plough


SG250 Wheel Levelling Tack

SPECIFICATION OPTIONS

• Wheel Track Levelling Kit - essential if a ‘one pass’ system is required. On any rough surface, the area immediately in front of each wheel is graded to provide a level track to travel on. This provides a stable platform for the main blade to produce a smooth finish on the first pass.
• Alternative Hitches - e.g. Clevis, for use behind other suitable towing vehicles.

THIS PRODUCT IS PROTECTED BY DESIGN RIGHT


POINTS TO CONSIDER

When considering a Logic Manege Grader, you should take note of the following features that make it stand out from any other similar products.

• WHEEL TRACK LEVELLING KIT is an option on our grader, but is chosen by 99% of our customers. It comprises a
plough in front of each wheel, which can be adjusted for depth of working, depending on the manege surface material. This reduces the undulation of the surface to a mere fraction of the original, and creates a level path for each wheel to
travel on. The following main blade can be set to grade the surface accordingly. The end result is a simple “one pass” system that saves so much time over the life of the implement.
• EVEN BALANCE of the Logic grader is important, not only from front to rear, but side to side, in order to achieve easy manoeuvrability and a perfectly level mode of action.
• LIFT MECHANISM is very easy to operate on the Logic grader. This facility enables quick and easy reversing into corners to pull out any build up of material and easy adjustment of the settings for the blade depth, wheel track levelling blades and perimeter plough.
• EDGE BLOCK on the Logic grader is made of an extremely hard-wearing rubber, to allow continual contact with the perimeter boards when grading the outer area. This block prevents any damage to the grader or the boards and will not require any maintenance, unlike a wheel type buffer.
• BLADE DESIGN is no accident. The shape has been formulated to produce the best levelling performance with least spillage. Compared to straight, or other shaped blades, ours levels and firms more, which is important with some lighter materials.
• WORKS ON MOST SURFACES, like pure sand, sand / fibre mixtures, sand / plastic mixtures, sand / rubber mixtures, even on wood chip surfaces. It doesn’t like surfaces of large rubber pieces, but we’re working on that one !
Extract from “British Horse Society” magazine reference, Winter report from their rescue centre at
Stonecroft , Warwickshire.
“ With all maneges in use this time of year, keeping the surface level and soft is a must if ongoing use is to be maintained.
With exercising in the paddock during the winter months being a non starter the two maneges at the centre are in constant use , whether it be for individual riding or just for turning out area for short periods. The Logic Surface Grader together with Rhonda makes short work of levelling each manege, with once around the boards (pulling any excess material from these areas) and then once over the surface means 10 minutes is all it takes to bring the surface back into shape. The Logic grader has several clever features including the already mentioned plough system, a wheel track levelling kit levels the ground in front of each wheel which ensures the main blade at the rear is kept level. The grader’s wheels also make it easy to reverse into corners or behind jumps and tow back to its storage area when finished with. Finally there is an option of a 50mm ball or clevis hitch to suit different towing vehicles. This product is well made and offers exceptional value for money.”